This Peak Design Capture Clip Review is by outside photographer and mountaineering fanatic Usnea Lebendig from Portland, Oregon.
As an avid backpacker, I’m continually on the lookout for better methods to carry my digital camera while on the path.
Most of my backpacking packs require me to take off the pack to entry my digital camera, and carrying it by hand or on a chest harness gets a bit previous after some time (especially once I used to shoot with a DSLR).
A couple of months in the past I found Peak Design’s Capture Clip and determined to provide it a attempt.
Extremely Advisable ★★★★★Useful, reasonably priced, easy to function.
I really love Peak Design gear, their enterprise mannequin, their designs, and most of all, the quality of all the things they make.
So although I was bit dubious – would I really need to carry my digital camera on my shoulder? – I gave it a go. I’m so glad I did…
Design of the Peak Design Capture Clip V3
It turns out that the Capture Clip is the original Peak Design product. Then traveler Peter Dering went a visit, acquired annoyed with carrying his DSLR, and then went house and give up his job. Ten months and a Kickstarter marketing campaign later, the first Capture Clip (and consequently Peak Design) was born.
This was all again in 2011. Lately we’re on Capture Clip V3, a a lot sleeker and more streamlined model of the unique clip.
You’ll be able to simply buy the clip, purchase the clip with the usual mount (like I have), and/or select from totally different equipment, together with kits that work with lenses, binoculars, and action cameras/point-and-shoots (including GoPros) – see the whole line up of gadgets right here.
My Peak Design Capture Clip came with an ordinary Arca-compatible plate, 2 hand-drive screws, 2 4mm hex screws, a hex wrench and a microfiber pouch to retailer the whole lot in.
The Capture Clip itself is manufactured from weatherproof, rust-resistant aluminum and weighs just Three ounces (84 g). It appears fairly heavy at first, however as soon as I was sporting my pack I didn’t actually notice it.
The standard digital camera plate is a bit lighter than the clip (zero.5 oz/14 g), though heavier than my tripod plate. It screws in with the hex key, which comes with it.
One cool factor about the usual plate is that it has four anchor factors. This provides your digital camera four-way entry into the clip. There’s no entrance or again – you possibly can’t get it flawed.
Another cool factor is the security lock is on the button of the Peak Design Capture Clip. A simple 90-degree turn locks or unlocks the clip. (That is far more streamlined than the bulkier security lock of versions 1 and a couple of.) There’s a hash mark to point out whether or not you’re open or closed (they’re aligned when open).
As far as the place to put it, that’s really up to you. Peak Design recommends the appropriate shoulder simply above the sternum on a backpack and simply off to the correct aspect on the belt, however really, you’ll be able to place it anyplace.
It’ll match most straps as much as roughly 2.5-3 inches vast and zero.87 inches thick, relying on their rigidity. That provides you plenty of options.
Just notice, for one-handed entry maintain the fast release dealing with down. On a backpack strap, face it inward.
Key Options of the Capture Clip
The Peak Design Capture Clip is designed to be mild, ergonomic, and to offer a useful method of carrying your digital camera /lens/binos on the go.
It additionally has these options:
- Straightforward on/straightforward off (one-handed with follow)
- Rust-proof aluminum
- Rubberized backplate to stop scuffing
- Hex screws for more permanent installations
- Quick launch button with security lock
- Can hold as much as 200 lbs (90 kg)
- Version Three is smaller, lighter, and more secure than previous variations
- Can be utilized with DSLRs, mirrorless cameras, action cameras, point-and-shoots, lenses, and binoculars
- Plenty of choices for placement – it can work on just about any strap not more than 2.5 inches broad and zero.87 inches thick
Chances are you’ll find a barely cheaper earlier model of the Capture Clip, however I extremely advocate you spend money on the V3 – it’s smaller, lighter, more strong, grippier and has more secure bolts.
Installation and Use
The packaging of the Capture Clip doesn’t really come with a variety of instructions. There were a variety of issues I didn’t understand in consequence.
The primary was what the hex screws have been for. The thumb screws (proven above) seemed pretty self-explanatory, no? Nicely truly, no. Apparently the thumbscrews work higher on belts and thinner straps usually. For thicker straps you’ll need to use the longer hex screws.
Should you attempt the thumbscrews on your pack, you’ll in all probability find yourself wondering (like I did), why the clip is so arduous to get on. The photograph above is working example – I’m utilizing the Peak Design Everyday Backpack and the Clip doesn’t fairly match. Change to the hex screws and voila!
One thing with the hex head screws, although, is you gained’t have the ability to feel once they’re tight. You must examine manually by seeing if the Capture Clip is secure. If it strikes up and down on your strap you clearly have a bit more tightening to do. If it doesn’t budge, you’re good to go. Any more tightening and also you may mess together with your strap.
Even with the hex screws, though, I had a tough time getting the Capture Clip on my backpacking rucksack. It did, nevertheless, work advantageous on my Osprey day pack.
The Peak Design help page mentions you could “pinch the foam and squeeze the clip on” for thicker straps, but I’m nonetheless dubious as as to if I can get it on my multi-day packs.
It might not look like it, however it’s truly fairly straightforward to get your digital camera out and in of the clip one-handed. It takes follow and you’ll want to ensure that the quick-release button is dealing with in, however it’s undoubtedly doable.
If you’re first getting began, although, it’s greatest to use two arms. (Once we first tried it out, we had the button on the surface and it undoubtedly needed two palms!)
Placing the digital camera onto the Capture Clip and taking it off is a breeze, especially with the standard Four-way plate. It goes on any which means and once you hear the press, the digital camera is safe.
While on the path, I by no means as soon as felt like my digital camera was insecure with the the Capture Clip. Positive, I was nervous at first – it appeared like an odd solution to carry a digital camera – however it held and I shortly discovered to like it. I didn’t even discover the security lock on the fast launch button.
For those who’re nervous, you’ll be able to all the time activate it. Simply turn it 90 degrees and the button can be locked. Just keep in mind to release it earlier than making an attempt to get your digital camera out of the clip.
Also, there’s presupposed to be a bit of little bit of play between the digital camera and the clip. With out that play it might be inconceivable to get your digital camera in or out.
Ideas and Tips
- The Capture Clip, when used on the belt, can present a super-stable lens altering platform. Merely put the digital camera on vertically (it’ll look “sideways”). The Capture Clip will hold it in place perfectly on your lens change.
- Should you’re utilizing smaller prime lenses, contemplate putting your digital camera on vertically as properly. It will make it so the load is pointed down, retaining the digital camera rather more safe.
- It’s lots easier to carry a larger digital camera and/or giant lens setup when using the Pro Pad. (See under.)
Peak Design Capture Clip Accessories
Peak Design’s Capture Clip has been round long sufficient to have a lot of accessories out there for it. The downside is that they’re all fairly expensive. The upside is that they’re all exquisitely designed.
To begin with, you have got the two digital camera plates: the standard ARCA-compatible plate and the dual plate that’s Manfrotto (RC2) suitable. (Due to the geometry, this one is simply a two-way entry, not a four-way.)
Past this, there are three totally different accessory kits, all bought individually:
- The Bino Package – for binoculars. Super handing for birding or searching.
- The Lens Package – helps Nikon, Canon, and Sony lenses
- The POV Package – designed for GoPros and point-and-shoot cameras. (This one has unfortunately not been optimized for V3 but. They’re working on it.)
There’s additionally the aforementioned Professional Pad, which provides way more stability. It’s meant for pro photographers (therefore its identify) however I haven’t had a chance to attempt it out but. Anyway, I’m capturing on a Sony A7III, so I’m not likely carrying that much weight.
When you’ve got a earlier version of the Capture Clip and are wondering if it’s backwards suitable, the answer is most probably sure…with a couple of exceptions:
You’ll be able to take a look at all the equipment for the Capture Clip right here, and find out more about what works with what.
There are some things I didn’t like so much concerning the Capture Clip.
- Neither of my journey tripods use an ARCA plate, so I have to vary out. Meaning I’ve to carry around the hex wrench. A little bit of a bummer for positive.
- The Capture Clip and its accessories are expensive. Granted, we get what we pay for right here, however it’s a bit a lot.
- It doesn’t fit on inflexible, large straps (i.e. my primary backpacking packs). That’s another real bummer for me, as that was my main purpose for purchasing it.
- For those who’re capturing with a Fujifilm X-T1, it’s a must to remove the fast launch plate to get to the battery.
Granted, these minor niggles are all fairly personal – I can see most photographers being utterly glad with the Capture Clip, but I assumed I’d point out them anyway.
Peak Design Capture Clip Review | Last Words
I didn’t actually anticipate to like the Capture Clip, but just a bit time within the subject and I discovered that I liked it.
It’s just about what I used to be on the lookout for as far as backpacking goes. No more carrying my digital camera in hand or utilizing a chest harness (which I find uncomfortable when I’ve a fully-loaded backpacking pack on as properly).
The Peak Design Capture Clip is mild, straightforward to make use of, keeps the digital camera/lens/and so on. on the ready, and works on all kinds of straps.
I really like using it with my Osprey on lengthy day treks. I’m positive I’ll discover a solution to get it onto my bigger pack too. Simply need to play around with it a bit extra, I think.
Extremely Really helpful, and a steal for the worth.
Highly Really helpful ★★★★★Helpful, reasonably priced, simple to function.
Disclaimer: All recommendations are impartial and based mostly on consumer experience, with no bias to the products or the model. The merchandise on this submit include affiliate links which help help Shotkit.